D-Link Router Setup

https://www.dlnkrouterlocal.net/d-link-router-setup/

How to Setup D-Link Router?

How to Setup D-Link Router? : D-link router setup requires an access to the web based setup wizard that is specifically designed for D-link wifi router setup and configuration of wireless connection. When the users log into the d-link router’s Web GUI for the first time through dlinkrouter.local, the dlink setup wizard automatically launches. Its basic function is to guide through a detailed D-link router setup process with every step. Also, it allows configuration of internet connection for setup and configuration of wireless settings to connect to the Internet.  D-link setup is followed through internet connection setup wizard via dlink router login making use of the steps subsequently in order as follows:-

  1. Setting up hardware connections
  2. Dlink router login via dlinkrouter.local
  3. Configuring wireless network
  4. Assigning SSID and Password for wifi security
  5. Selection of time zone
  6. Confirming Wireless network settings 
  7. Create Mydlink account   

Here is the dlink setup discussed in detail view of steps for complete easy and quick dlink router setup. 

How to Setup D-Link Router?

D-link router setup steps

Step 1.setting up hardware wired connection:-

  • Disconnect your Internet Modem from the power source by turning off the power supply switch.
  • Setup your computer to your D-link router with an Ethernet cable that should be attached at any of the available 4 LAN ports on the D-link router.
  • Also, set up your Cable or a DSL modem to the –link router using an Ethernet cable at the Yellow coloured WAN Port of the D-link router.
  • Apply power to the modem by connecting it to the power supply using an adapter.
  • Turn on the modem. Let the power LED show light.
  • Connect the computer as well as the D-link router to the power and turn them on as well.
  • Allow the power LED indicator to show light after receiving power.

To setup computer wirelessly to the D-link router:-

  • You should be having an active internet connection to connect the computer and the d-link router prior to d-link router setup.
  • This would make use of the wireless network settings of the internet network being used.
  • You must enter the wireless network name i.e. SSID along with wireless network password of your stable wifi connection that would allow dlink router setup process run smoothly.

Note: It is usually not recommended to use the wireless network connection to connect the computer to the dlink router as the dropping wireless signals during the dlink router setup process could hinder the router setup and configuration of wifi settings would be impossible.

Step 2. Dlink router login via dlinkrouter.local:

  • Launch any supporting web browsing window on your computer setup with the dlink router above.
  • Head over to type Dlink router login web address dlinkrouter.local in browser’s address bar.
  • Press Enter to allow login and the dlink router login page appears.
  • If dinkrouter.local fails to direct to the login page, use dlink router login via default IP address http://192.168.0.1 IP.
  • Press Enter to allow Default gateway login and the dlink router login page appears.
  •  For initial dlink router login, the users would be directed to the Setup Wizard window automatically.
  • This dlink setup wizard auto-launch to take you through the D-link router setup process with steps on screen.
  • It allows configuration of a new dlink router and connection to the internet.
  • Click Next link to continue setup.
  • Select your preferred Language for D-link router setup and configuration.
  • Click on Start tab to precede dlink router setup.

Step 3.D-link router wireless network configuration:

  • Allow the Setup wizard to detect the d-link router configuration of wireless internet connection as the initial step.
  • During the process, you are asked to fill information in the username and password field for your network.
  • You must provide this information from your Internet Service Provider.
  • If D-link router detects the Ethernet connection instead of type of internet connection, a prompt screen appears to allow the Manual Configuration.
  • Click on Guide me through the internet connection settings link on the configuration screen.
  • This would display a list of wireless connection types, from which you would have to choose your type.
  • You could opt for either Dynamic or PPPoE internet connection type.
  • Select DHCP/ Dynamic connection type in case you have a cable internet service being used and you do not require any information to get internet access as this automatically provides an IP address.
  • Select PPPoE connection type in case you have a DSL internet service and you would require username and password information to get connected to internet access. 

Step 4 – Assign SSID and password for dlink wifi security

  • Create a Wireless Network Name SSID for both the 2.4GHz and 5GHz wireless band frequencies.
  •  Also setup a new wireless network password, for each band of, about 8 characters for security.
  • Click o Next link to proceed.
  • To secure your d-link router, you must create a password to access the firmware of the dlink router as well. 
  • Click on the Next tab to continue.
  • Also, Allow wireless network security d-link router wifi with WPA/WPA encryption mode.
  • Apply the configured wireless settings by saving them.
  • Create a new password for dlinkrouter.local login as well when interpreted.

The new dlink router login password should be different from the wireless network password for overall security of the dlink router. Ensure to create a strong password with characters for secure dlink router login via dlinkrouter.local or default gateway.

Step 5. Selection of time zone

  • Choose the appropriate Time Zone from the drop down menu.
  • The D-link router setup would automatically update the time clock to the new settings and reboots. 
  • The dlink router setup complete window shows up. Click on Next.

Step 6.confirming d-link router’s wireless network settings

  • A detailed summary page window shows wifi security settings. 
  • Check the SSID as well as password details for both 2.4GHZ and 5GHZ bands.
  • Confirm the wireless settings to allow configuration using correct wifi settings on your wifi devices.
  • Click on OK.

This would complete the entire process of D-link router setup and installation. The wireless settings should be used to connect the wireless devices to the Dlink router’s wifi network. You require SSID and password created during dlink router setup to connect your devices to the dlink router network.

p 8. Create mydlink account – setup and configuration.

Step 8. Create mydlink account – setup and configuration.

  • You are asked to create mydlink account once you complete dlink router setup.
  •  If you previously created a mydlink account, enter the registered email address along with password for configuration of settings remotely.
  • If you have no mydlink account registered, create it following the onscreen instructions.
  • When prompted enter an email id to register with your mydlink account.
  • Setup a strong password for mydlink account login.

mydlink account login utilizes a web portal via mydlink.com or mydlink app on phone but does not use dlinkrouter.local for login. Mydlink account allows the users to access the dlink router remotely from anywhere and at any time according to your convenience. You should only know the registered email address and password to log into your mydlink account to access the web GUI of the Dlink router.

What to do if the Dlink router setup wizard can't find the D-link router?

  • Check if the latest D-link router setup wizard is being used for your router.
  • The computer used for D-link router setup and D-link router login using dlinkrouter.local web protocol address must be on the same network and subnet.
  • Avoid affixing dlink router to other hardware devices wirelessly; it is always advisable to use wired connection during the entire D-link router setup process of your device.
  • Also, while the Dlink router setup process continues, ensure to turn off the antivirus and firewall protection.
  • Once the setup is complete, you should turn on your antivirus or firewall software to let them not hinder setup wizard in D-link router setup.
  • Ensure you are using the correct dlink router login web address dlinkrouter.local to access the setup wizard for the first time.
  • If dlinkrouter.local does not provide access to the setup wizard, make use of the default gateway for login that uses default IP address http://192.168.0.1 IP.
  • Ensure you are using correct dlink router login steps as follows to access the setup wizard:
  • Launch any supporting web browsing window on your computer setup with the dlink router above.
  • Head over to type Dlink router login web address dlinkrouter.local in browser’s address bar.
  • Press Enter to allow login and the dlink router login page appears.
  • If dinkrouter.local fails to direct to the login page, use dlink router login via default IP address http://192.168.0.1 IP.
  • Press Enter to allow Default gateway login and the dlink router login page appears.
  • For initial dlink router login, the users would be directed to the Setup Wizard window automatically.
  • This dlink setup wizard auto-launch to take you through the D-link router setup process with steps on screen.