Slider

dlinkrouter.local – D-link Wifi routers are the great budget routers. They deliver consistent speed on both of its 2.4 GHz and 5GHz bandwidths ensuring more reliability. With lots of applauding features as mydlink app, QoS for prioritizing your connected devices, parental controls and much more, D-link routers are in great demand. They can be easily installed and setup with its setup Wizard accessible through http://dlinkrouter.local web portal address. mydlink account registration and mydlink app offers remote handling of the router for D-link wifi router configuration. Experience and look through every solution here, on our page, to be at convenience with handling of D-link wifi router and network.

Dlink router setup(dlinkrouter.local)

D-link router setup(dlinkrouter.local) becomes easy with the web based setup wizards which are designed for D-link wifi routers to assist the users in the dlink router setup and wireless connection setup. Logging into the d-link router Web GUI for the very time after installation, directs you automatically to the smart setup Wizard. The setup wizard guides you through D-link router login involving dlinkrouter.local web address to set up quickly. This internet connection setup wizard takes you through on screen step-by-step for new D-Link router setup and configuration to connect to the Internet.

D-link setup and configuration is done through internet connection setup wizard by making use of following steps subsequently:

  1. Internet connection setup(dlinkrouter.local)
  2. Dlink router login(dlinkrouter.local)
  3. Wireless security configuration(dlinkrouter.local)
  4. Password setup(dlinkrouter.local)
  5. Selection of the time zone(dlinkrouter.local)
  6. Dlink web GUI access(dlinkrouter.local)
  7. Confirming Wireless settings(dlinkrouter.local)
  8. Mydlink account registration(dlinkrouter.local)

The detailed dlink setup of above steps is given below for helping you out in the entire setup.

dlinkrouter.local

D-link wifi router setup

dlinkrouter.local

Step 1. Internet connection setup – wired connection:

  1. Disconnect your Cable/DSL Internet Modem in use from power supply by turning off power.
  2. Adjoin your computer to your D-link router by an Ethernet cable. Attach the cable to any of the 4 LAN ports of the D-link router and computer.
  3. Adjoin your Cable/DSL modem (that you disconnected from power above) to the Yellow coloured Internet Port of the D-link router.
  4. Connect all the devices to power i.e. D-link router as well as your Internet Cable/DSL Modem and computer being used.

Step 2. Dlink router login – dlinkrouter.local login

  1. Launch a D-link website supporting Internet browser on your connected computer.
  2. Key in Dlink router login web protocol web address dlinkrouter.local in above browser’s address bar.
  3. If dinkrouter.local does not respond, try dlink router login alternatively by entering http://192.168.0.1(dlinkrouter.local)
  4. IP into the address bar.
  5. On initial dlink router login, dlink wifi router users are directed to the Setup Wizard screen.
  6. The setup wizard screen guides you through D-link router setup process hereon.
  7. You will be demanded to select your Language of choice for D-link router setup and D-link router configuration.
  8. Choose the Start option for dlink router setup.
dlinkrouter.local
dlinkrouter.local

Step 3. D-link router wireless/ wifi security configuration

  1. Setup wizard takes allows d-link router configuration of wireless internet connection as the initial step.
  2. When prompted, choose the Manual Configuration as the option to dlink router configuration.
  3. You will be asked to opt for your wireless Internet Connection type, to be either Dynamic or PPPoE
  4. Allow D-link router Wifi security by creating a Wireless Network Name SSID and wireless network key/Password.
  5. Also, Allow D-link router wireless network security with WPA/WPA encryption for enhanced dlink wifi router safety.

Step 4. D-link router Password setup

  1. When asked on screen, setup your D-link router login password (http://dlinkrouter.local login) to enter into the D-link router’s web GUI.
  2. Create a strong password other than your default dlink router login password for dlink wiif security.
  3. Apply the settings.
dlinkrouter.local
dlinkrouter.local

Step 5. D-link router Selection of the time zone

  1. Choose the Time Zone where the d-link wifi router is setup.
  2. The D-link router setup proceeds with applying the new settings and reboots.

Step 6. Dlink web GUI access

  1. You will have to enter the D-link router login credentials in the d-link routers Login filed on Screen
  2. Enter the d-link login username as admin, which is already set by default.
  3. Next, key in dlink router login password applied above for D-link router login to enter web GUI.
dlinkrouter.local
dlinkrouter.local

Step 7.confirming wireless settings

  1. After entering the web GUI through dlink router login, A screen will show the wireless network settings for confirmation.
  2. Check the SSID and password details.
  3. This completes the D-link router setup and installation.

Step 8.mydlink account setup and configuration.

  1. You will be requested to create a new mydlink account for your D-link router model.
  2. If you have a pre- existing mydlink account, enter the registered email address and password for dlink router configuration remotely.
  3. If you do not have an account, create one by following the displayed instructions to register your email id and password.
  4. mydlink account login makes use of web portal through mydlink.com or mydlink app on phone but not dlinkrouter.local login.
  5. Dlink router setup for the first time is advised over a wired connection to make sure that the wireless connection isn’t dropped.
dlinkrouter.local

Dlink router login

Dlink router login lets the users reach the D-link router web GUI to access the router’s wireless network settings, connections settings, firmware updates, parental control and accessing many features thereby allowing D-link router configuration. Dlink login is successful through addressing a web portal access address dlinkrouter.local, using dlink router default login username and password. Let’s get through step wise guide to dlink router login:-

  1. Access a D-link website supporting web browser on your computer.
  2. Ensure that your computer is connected to D-link router’s LAN port by wired connection or wireless settings over wifi.
  3. To log into the D-link router’s setup page or GUI, enter D-link router default login address local into the address bar.
  4. The web login redirects you to D-Link router’s login page.
  5. D-link router login screen prompt appears to let you input D-link router login details.
  6. Key in ‘admin’ as username (set by default) and no password (if not changed) field.
  7. D-Link router login via dlinkrouter.local takes you to web GUI.
  8. You can now configure the d-link router settings from the dlink wifi router’s web GUI.
Dlink router ip

Dlink router IP addresses http://192.168.0.1 or 192.168. 1.1 allows entering the login page of router. It requires username and password provided by the d-link router company as mentioned on the label on dlink wifi router.

Dlink router login using Dlink router ip
dlinkrouter.local
  1. Access a D-link website supporting web browser on your computer.
  2. Ensure that your computer is connected to D-link router’s LAN port by wired connection or wireless settings over wifi.
  3. Type the D-link router IP address into the address bar. The Default IP address for dlink router login is 192.168.0.1
  4. D-link router login screen prompt appears to let you input D-link router login details.
  5. Key in ‘admin’ as username (set by default) and no password (if not changed) field.
  6. Click on Log in tab.
  7. You will enter the dlink router’s admin page/WEB GUI.
How to change D-link routers IP Address?
  1. Access a D-link website supporting web browser on your computer.
  2. Ensure that your computer is connected to D-link router’s LAN port by wired connection or wireless settings over wifi.
  3. Type the D-link router IP address into the address bar. The Default IP address for dlink router login is 192.168.0.1
  4. D-link router login screen prompt appears to let you input D-link router login details.
  5. Key in ‘admin’ as username (set by default) and no password (if not changed) field.
  6. Click on Log in tab.
  7. You will enter the dlink router’s admin page/WEB GUI.
  8. Click on Setup to access the wireless Network Settings
  9. Go to the Router Settings.
  10. Key in the D-link router´s new IP address and subnet mask.
  11. The IP Address being configured here is the IP Address used for accessing the Web-based management interface.
  12. In order to change the IP Address here, you will have to adjust your computer’s network settings to access the wireless network over again.
  13. To adjust network settings, disconnect and reconnect to the network again.
  14. Save the Settings to apply.
dlinkrouter.local
Dlink router default password

The dlink router default password can be searched for in its manual or found mentioned on the dlink wifi router’s label. However, the default password for dlink router login is blank field.

 

Dlink router setup password
dlinkrouter.local

Make it sure that you have powered on your D-Link Router.

  1. Access a D-link website supporting web browser on your computer.
  2. Ensure that your computer is connected to D-link router’s LAN port by wired connection or wireless settings over wifi.
  3. To log into the D-link router’s setup page or GUI, enter D-link router default login address local into the address bar.
  4. The web login redirects you to D-Link router’s login page.
  5. D-link router login screen prompt appears to let you input D-link router login details.
  6. Key in ‘admin’ as username (set by default) and no password (if not changed) field.
  7. D-Link router login via dlinkrouter.local takes you to web GUI.
  8. Take the cursor to the Settings tab and select it.
  9. Visit the Wireless Settings from drop down menu.
  10. Set up your Wi-Fi Network by recreating new password for both the 2.4GHz and 5GHz.
  11. Apply the settings.
Dlink router setup password can also be done using mydlink as discussed

For this, you must have registered your dlink wifi router with mydlink. you may either log in to the mydlink web portal using website address www.mydlink.com or mydlink app to modify your dlink router’s settings.

  1. Visit https://www.mydlink.com to enter dlink router GUI.
  2. Mydlink login page appears.
  3. You will be asked to enter your existing mydlink account/email id and password.
  4. Choose the D-link router model from My Devices.
  5. Select the Settings option.
  6. Go to Basic Settings to change your password.
  7. Click on the Show Password option to display the password on your screen.
  8. Recreate and enter a new password in this respective field.
  9. Save the changes.
  10. You will be prompted to confirm the new settings on the dlink wifi router.
  11. Click on yes option.
  12. This will approximately take 80 seconds to save the dlink router setup password settings.
  13. The dlink router will reboot once the settings are applied.
Dlink router password reset

Follow the below mentioned steps to recover your password in case you have forgotten it and are unable to enter the dlink router login page through dlinkrouter.local.

Note:- Some routers do not have the ability to recover your wireless password. If the following do not work, you will need to change the password altogether.

  1. Access a D-link website supporting web browser on your computer.
  2. To log into the D-link router’s setup page or GUI, enter D-link router default login address local into the address bar.
  3. The web login redirects you to D-Link router’s login page.
  4. Alternatively, type the D-link router IP address into the address bar. The Default IP address for dlink router login is 192.168.0.1
  5. D-link router login screen prompt appears to let you input D-link router login details.
  6. Key in ‘admin’ as username (set by default) and no password (if not changed) field. Note:- If you have forgotten this password, you will have no choice but to reset the router to factory defaults.
dlinkrouter.local
Dlink router reset
  1. Ensuring the dlink router is switched on, press and hold down the factory reset button on the back of the dlink wifi router.
  2. Hold the reset button about 10 seconds and then release it.
  3. The LED lights will stop flashing and the router will reboot.
  4. The dlink router password settings will be setup to default.

 

Dlink router password

The dlink wifi router users can change the Dlink router login password to enter D-link router settings page. This can be done using dlinkrouter.local or dlink router ip login to access the settings page and change the dlink login password as explained:

dlinkrouter.local
  1. Access a D-link website supporting web browser on your computer.
  2. Ensure that your computer is connected to D-link router’s LAN port by wired connection or wireless settings over wifi.
  3. To log into the D-link router’s setup page or GUI, enter D-link router default login address local into the address bar.
  4. The web login redirects you to D-Link router’s login page.
  5. Alternatively, type the D-link router IP address into the address bar. The Default IP address for dlink router login is 192.168.0.1
  6. D-link router login screen prompt appears to let you input D-link router login details.
  7. Key in ‘admin’ as username (set by default) and no password (if not changed) field.
  8. You enter the Dlink router web GUI.
  9. Click with the cursor on Tools tab.
  10. Select Admin on the left of settings page.
  11. Enter a new password to create a new one in the Admin Password section.
  12. Select Save to save the new password settings.